Email Us For Fast, Personalized Attention:

info@multitechmarine.net

Rigging icon

Lagoon 450 Forward Mast Bulkhead, Mast Compression Post & GOIOT Hatch Service

Multitech Marine is a Lagoon Service Center in Fort Lauderdale, and Lagoon lists us on its own Lagoon 450 support page. Lagoon has published guidance on three items every 450 owner should know about: the forward mast bulkhead, the mast compression post, and the GOIOT escape hatches. We inspect them, repair them to Lagoon’s procedure, and handle the paperwork with Lagoon support so you know what applies to your boat.

Forward Mast Bulkhead

The sides of the 450’s forward mast bulkhead, by the forward cabin doors, can buckle or crack over time. Lagoon and VPLP have confirmed it is not a safety issue, but Lagoon recommends reinforcing or repairing it so the load does not shift elsewhere in the boat. Because interior panels hide the damage, squeaking from the bulkhead area is the best warning sign. We first do the inspection Lagoon asks for, send the findings to Lagoon, and then carry out the reinforcement or repair with Lagoon’s kit and procedure. Lagoon’s published policy covers the inspection when its dealer and service network does it, and the rest depends on your boat’s warranty status and history. We confirm what applies to you with Lagoon before any work starts.
Lagoon 450 forward bulkhead opened up during repair, showing the buckled plywood

Mast Compression Post

The mast compression post is the steel post that carries the mast load down through the boat. Because Lagoon found a few cases of corrosion, it added a yearly check of the post and the mast wiring routing to Lagoon 450 maintenance. Look for rust or cracks at the top of the post. If you find a crack, Lagoon advises motoring rather than sailing until you replace it, and if the post breaks, do not sail. We take down the headliner, inspect the post and cable routing, and then, if it needs replacing, fit Lagoon’s improved replacement post using Lagoon’s method.
Lagoon 450 mast compression post exposed for inspection, and its corroded base plate

GOIOT Escape Hatch

The fixed GOIOT escape hatches in the hulls are under a recall on Lagoon catamarans built 2007 to 2019 because of a few cases of the glass coming away from the frame and letting water in. The fix is a retaining kit that holds the glass in place. Lagoon now also says to replace hatches 10 years or older as routine maintenance, kit or not. We check your hatches, install the recall kit, and also supply and fit replacement hatches.
Fitting the aluminium retaining bracket to a GOIOT escape hatch on a Lagoon 450

How It Works

1. Send the form. Tell us about the boat and attach any survey or photos.

2. We review and call you. We check your details, work with Lagoon support where it applies, and then explain the next step and any costs.

3. We schedule the work. Inspection or repair at our Fort Lauderdale or Riviera Beach location.

Lagoon 450 Service Request

Fill in what you know. Lagoon asks for this information to support each boat, so the more you give us, the faster we can move. Submitting this form sends a service request. It is not a confirmed booking, and we will review your request and follow up with you directly.

Owner

Your Boat

Previous Owners (optional)

Use & History

Documents & Photos